Product SiteDocumentation Site

8.10. ترجمة النواة

تتضمن النواة التي توفرها دبيان أكبر كمية ممكنة من الميزات، بالإضافة إلى أكبر كمية من تعريفات الأجهزة، في سبيل تغطية أوسع طيف من تجميعات العتاد الموجودة. لهذا تجد بعض المستخدمين الذين يفضلون إعادة ترجمة النواة حتى تتضمن ما يحتاجونه بشكل خاص فقط. هناك دافعين رئيسيين وراء ذلك. أولاً، قد يُحسن هذا من استهلاك الذاكرة، لأن كود النواة سيحجز الذاكرة دون سبب، حتى لو تكن هناك حاجة له (كما أنه لا ”ينزل“ إلى مساحة التبديل أبداً، لذلك فهو يستهلك الذاكرة RAM الفعلية)، وهذا قد يخفض الأداء الكلي للنظام. كما أن النواة المترجمة محلياً قد تحدّ من خطر المشاكل الأمنية لأن كود النواة المترجم والمستعمل يشكل جزءاً فقط من الكود الكلي.
إعادة ترجمة النواة ضرورية أيضاً إذا كنت تريد استخدام ميزات معينة متاحة بشكل رقع (patches) فقط (وليست مضمنة في نسخ النواة القياسية).

8.10.1. المتطلبات الأولية ومقدمة

ليس غريباً أن تدير دبيان النواة بشكل حزمة، ولم تكن هذه الطريقة هي المتبعة في ترجمة وتثبيت النوى تقليدياً. بما أن النواة تبقى تحت سيطرة نظام الحزم، فيمكن عندها إزالتها بشكل نظيف، أو تنصيبها على عدة أجهزة. بالإضافة لذلك، تؤتمت السكربتات المرتبطة بهذه الحزم التفاعلات مع محمل الإقلاع ومولد initrd.
The upstream Linux sources contain everything needed to build a Debian package of the kernel. But you still need to install build-essential to ensure that you have the tools required to build a Debian package. Furthermore, the configuration step for the kernel requires the libncurses-dev package (formerly libncurses5-dev, which is now a transitional package). Finally, the fakeroot package will enable creation of the Debian package without using administrator's rights.

8.10.2. الحصول على الشفرة المصدرية

Like anything that can be useful on a Debian system, the Linux kernel sources are available in a package. To retrieve them, just install the linux-source-version package. The apt search ^linux-source command lists the various kernel versions packaged by Debian. The latest version is available in the Unstable distribution: you can retrieve them without much risk (especially if your APT is configured according to the instructions of قسم 6.2.6, “العمل مع عدة توزيعات”). Note that the source code contained in these packages does not correspond precisely with that published by Linus Torvalds and the kernel developers; like all distributions, Debian applies a number of patches, which might (or might not) find their way into the upstream version of Linux. These modifications include backports of fixes/features/drivers from newer kernel versions, new features not yet (entirely) merged in the upstream Linux tree, and sometimes even Debian specific changes.
The remainder of this section focuses on the 5.10 version of the Linux kernel, but the examples can, of course, be adapted to the particular version of the kernel that you want.
We assume the linux-source-5.10 package has been installed. It contains /usr/src/linux-source-5.10.tar.xz, a compressed archive of the kernel sources. You must extract these files in a new directory (not directly under /usr/src/, since there is no need for special permissions to compile a Linux kernel): ~/kernel/ is appropriate.
$ mkdir ~/kernel; cd ~/kernel
$ tar -xaf /usr/src/linux-source-5.10.tar.xz
To build a kernel from the pristine sources, just download the tarball of the version of your choice from kernel.org, verify the integrity after importing the kernel maintainers key, and then proceed as described in the following chapters.

$ wget https://kernel.org/pub/linux/kernel/v5.x/linux-5.10.62.tar.xz
[..]
$ wget https://kernel.org/pub/linux/kernel/v5.x/linux-5.10.62.tar.sign
[..]
$ unxz -c linux-5.10.62.tar.xz | gpg --verify linux-5.10.62.tar.sign -
gpg: Signature made Fri 03 Sep 2021 10:11:35 AM CEST
gpg:                using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
gpg: Good signature from "Greg Kroah-Hartman <[email protected]>" [unknown]
gpg:                 aka "Greg Kroah-Hartman (Linux kernel stable release signing key) <[email protected]>" [unknown]
gpg:                 aka "Greg Kroah-Hartman <[email protected]>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg:          There is no indication that the signature belongs to the owner.
Primary key fingerprint: 647F 2865 4894 E3BD 4571  99BE 38DB BDC8 6092 693E

8.10.3. ضبط النواة

تتمثل الخطوة التالية في إعداد النواة حسب احتياجاتك. تعتمد الإجراءات الدقيقة على أهدافك.
When recompiling a more recent version of the kernel (possibly with an additional patch), the configuration will most likely be kept as close as possible to that proposed by Debian. In this case, and rather than reconfiguring everything from scratch, it is sufficient to copy the /boot/config-version file (the version is that of the kernel currently used, which can be found with the uname -r command) into a .config file in the directory containing the kernel sources. Make sure to read sidebar TIP Missing debian/certs/debian-uefi-certs.pem in this case.
$ cp /boot/config-5.10.0-8-amd64 ~/kernel/linux-source-5.10/.config
يمكنك أن تتوقف هنا وتقفز إلى قسم 8.10.4, “ترجمة وبناء الحزمة”، ما لم تكن مضطراً لتغيير الإعدادات. لكن إذا كنت تحتاج تغيير الإعدادات، أو إذا قررت إعادة ضبط كل شيء من الصفر، عليك تخصيص وقت كاف لضبط النواة. هناك واجهات متنوعة مخصصة لهذا الغرض في مجلد أكواد النواة التي يمكن استخدامها عبر استدعاء الأمر make target، حيث يأخذ target إحدى القيم المذكورة أدناه.
make menuconfig compiles and executes a text-mode interface (this is where the libncurses-dev package is required) which allows navigating the options available in a hierarchical structure. Pressing the Space key changes the value of the selected option, and Enter validates the button selected at the bottom of the screen; Select returns to the selected sub-menu; Exit closes the current screen and moves back up in the hierarchy; Help will display more detailed information on the role of the selected option. The arrow keys allow moving within the list of options and buttons. To exit the configuration program, choose Exit from the main menu. The program then offers to save the changes you've made; accept if you are satisfied with your choices.
Other interfaces have similar features, but they work within more modern graphical interfaces; such as make xconfig which uses a Qt graphical interface, and make gconfig which uses GTK+. The former requires qtbase5-dev, while the latter depends on libglade2-dev and libgtk2.0-dev.
عند استخدام إحدى واجهات الضبط هذه، يفضل دوماً البدء من إعدادات افتراضية مقبولة. توفر النواة إعدادات كهذه في arch/arch/configs/*_defconfig ويمكنك أن تضع الإعدادات التي اخترتها حيز التطبيق باستخدام make x86_64_defconfig (على حواسيب 64 بت) أو make i386_defconfig (على حواسيب 32 بت).

8.10.4. ترجمة وبناء الحزمة

Once the kernel configuration is ready, a simple make deb-pkg will generate up to 5 Debian packages:
linux-image-version
contains the kernel image and the associated modules,
linux-headers-version
contains the header files required to build external modules,
linux-firmware-image-version
contains the firmware files needed by some drivers (this package might be missing when you build from the kernel sources provided by Debian),
linux-image-version-dbg
contains the debugging symbols for the kernel image and its modules (only created if CONFIG_DEBUG_INFO=y), and
linux-libc-dev
contains headers relevant to some user-space libraries like GNU glibc.
The version is defined by the concatenation of the upstream version (as defined by the variables VERSION, PATCHLEVEL, SUBLEVEL, and EXTRAVERSION in the Makefile), of the LOCALVERSION configuration parameter, and of the LOCALVERSION environment variable. The package version reuses the same version string with an appended revision that is regularly incremented (and stored in .version), except if you override it with the KDEB_PKGVERSION environment variable.
$ make deb-pkg LOCALVERSION=-falcot KDEB_PKGVERSION=$(make kernelversion)-1
[...]
$ ls ../*.deb
../linux-headers-5.10.46-falcot_5.10.46-1_amd64.deb
../linux-image-5.10.46-falcot_5.10.46-1_amd64.deb
../linux-image-5.10.46-falcot-dbg_5.10.46-1_amd64.deb
../linux-libc-dev_5.10.46-1_amd64.deb
The whole process requires around 20 GB of free space, at least 8 GB of RAM, and several hours of compilation (utilizing one core) for a standard amd64 Debian kernel. These requirements can be drastically reduced by disabling the debug information using CONFIG_DEBUG_INFO=n, but this will make it impossible to trace kernel errors (“oops”) using gdb and also stop the creation of the linux-image-version-dbg package.

8.10.5. ترجمة الوحدات الخارجية

Some modules are maintained outside of the official Linux kernel. To use them, they must be compiled alongside the matching kernel. A number of common third party modules are provided by Debian in dedicated packages, such as vpb-driver-source (extra modules for Voicetronix telephony hardware) or leds-alix-source (driver of PCEngines ALIX 2/3 boards).
These packages are many and varied, apt-cache rdepends module-assistant$ can show the list provided by Debian. However, a complete list isn't particularly useful since there is no particular reason for compiling external modules except when you know you need it. In such cases, the device's documentation will typically detail the specific module(s) it needs to function under Linux.
For example, let's look at the dahdi-source package: after installation, a .tar.bz2 of the module's sources is stored in /usr/src/. While we could manually extract the tarball and build the module, in practice we prefer to automate all this using the DKMS framework (Dynamic Kernel Module Support). Most modules offer the required DKMS integration in a package ending with a -dkms suffix. In our case, installing dahdi-dkms is all that is needed to compile the kernel module for the current kernel provided that we have the linux-headers-* package matching the installed kernel. For instance, if you use linux-image-amd64, you would also install linux-headers-amd64.
$ sudo apt install dahdi-dkms
[...]
Setting up dkms (2.8.4-3) ...
Setting up linux-headers-5.10.0-8-amd64 (5.10.46-4) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 5.10.0-8-amd64:.
Setting up dahdi-dkms (1:2.11.1.0.20170917~dfsg-7.4) ...
Loading new dahdi-2.11.1.0.20170917~dfsg-7.4 DKMS files...
Building for 5.10.0-8-amd64
Building initial module for 5.10.0-8-amd64
Done.

dahdi_dummy.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.10.0-8-amd64/updates/dkms/

dahdi_dynamic_eth.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.10.0-8-amd64/updates/dkms/

[...]
DKMS: install completed.
$ sudo dkms status
dahdi, 2.11.1.0.20170917~dfsg-7.4, 5.10.0-8-amd64, x86_64: installed
$ sudo modinfo dahdi_dummy
filename:       /lib/modules/5.10.0-8-amd64/updates/dkms/dahdi_dummy.ko
license:        GPL v2
author:         Robert Pleh <[email protected]>
description:    Timing-Only Driver
depends:        dahdi
retpoline:      Y
name:           dahdi_dummy
vermagic:       5.10.0-8-amd64 SMP mod_unload modversions 
parm:           debug:int

8.10.6. ترقيع النواة

لا تتضمن النواة القياسية بعض المزايا لأنها غير ناضجة أو نتيجة بعض الخلافات مع مشرفي النواة. يمكن توزيع هذه المزايا كرقع يستطيع أي أحد تطبيقها على أكواد النواة إذا أراد.
Debian sometimes provides some of these patches in linux-patch-* packages, but they often don't make it into stable releases (sometimes for the very same reasons that they are not merged into the official upstream kernel). These packages install files in the /usr/src/kernel-patches/ directory.
To apply one or more of these installed patches, use the patch command in the sources directory then start compilation of the kernel as described above. The following shows an old example using linux-patch-grsecurity2 and linux-source-4.9.
$ cd ~/kernel/linux-source-4.9
$ make clean
$ zcat /usr/src/kernel-patches/diffs/grsecurity2/grsecurity-3.1-4.9.11-201702181444.patch.gz | patch -p1
لاحظ أنه لا يشترط أن تعمل أي رقعة مع جميع إصدارات النواة؛ قد يخفق الأمر patch عند تطبيق بعض الرقع على أكواد النواة. ستعرض رسالة خطأ تعطي بعض التفاصيل عن سبب الإخفاق؛ في هذه الحالة، راجع الوثائق المتوفرة في حزمة الرقعة (في المجلد /usr/share/doc/linux-patch-*/). في معظم الحالات، يذكر مشرف الحزمة إصدارات النواة التي أُعدَّت الرقعة لها.